logo
Search
Close this search box.
Search
Close this search box.

Mono-Layer Blown Film Machine: Components and Advantages

A mono-layer blown film machine is a primary piece of equipment used in the production of plastic film. Through an extrusion process, it converts molten plastic into a continuous tubular film—often referred to as a “bubble”—which is subsequently cooled and flattened. Unlike multi-layer co-extrusion systems, a mono-layer blown film machine processes only one type of material at a time. It is ideally suited for manufacturing products such as T-shirt bags, protective films, and basic packaging items that do not require high barrier properties.

Components of a Mono-Layer Blown Film Machine

The mono-layer blown film machine is the core equipment for producing single-layer plastic films, such as those made from PE or PP. It consists of several key components, including an extruder, a die head, a cooling system, and a take-up (winding) system.

Extruder

The extruder is the heart of the mono-layer blown film machine. It comprises a hopper, a single-screw barrel assembly, a drive motor, and a gearbox. The screw is typically nitrided to enhance its resistance to wear and corrosion. Through a combination of mechanical shearing (via the rotating screw) and external heating applied to the barrel, plastic pellets are fully melted and plasticized—typically at temperatures between 160°C and 230°C—before being steadily conveyed to the die head. Temperature and pressure within the barrel are strictly controlled to ensure the resin melts uniformly without degrading due to overheating. A variable-frequency drive (VFD) is often used to regulate the motor speed, which can reduce energy consumption by more than 30%.

Die Head

The die head is the component responsible for shaping the plastic resin into a film. It typically features a spiral-flow, single-layer channel design; lacking the complex, multi-channel structure found in co-extrusion systems, it is much simpler in design. It consists of a circular opening surrounded by a metal ring. As the plastic resin is extruded through this opening, it forms a hollow tube, which is then inflated to create a “bubble” (film bubble). The metal ring helps control the diameter of the bubble, while the air pressure inside the bubble directly determines the thickness uniformity of the film.

Cooling System

The cooling system consists of an air ring, a blower, and air ducts. Some high-end models offer an optional Internal Bubble Cooling (IBC) system, which uses a flow of cold air to rapidly cool and stabilize the hot tubular film as it emerges from the die, ensuring the bubble maintains a consistent shape.

This system also includes a series of rollers cooled by water or air. These rollers help dissipate heat from the film, lowering its temperature to a level suitable for safe winding. The cooling process is critical for ensuring uniform film thickness and preventing deformation or shrinkage.

Winding System

The winding system is the final component of a monolayer blown film extrusion line. It typically features an automatic dual-station roll-changing mechanism, enabling smooth, continuous winding of the film. It comprises a set of rollers that guide the film onto a core. The tension of the film is precisely controlled to ensure a tight and uniform roll.

Advantages of Monolayer Blown Film Machines

Wide Range of Applications: This equipment can process various plastic materials—including PE (LDPE, LLDPE, HDPE), PP, and EVA—and is suitable for diverse applications, such as agricultural films, packaging films, cling films, and industrial films.

Continuous and Automated Production: The equipment can be equipped with features like automatic roll changing, thickness control, and film leveling, which significantly enhance production efficiency.

High Precision in Thickness Control: Equipped with automatic thickness control systems (such as adjustable air rings and internal cooling systems), the machines ensure uniform film thickness and consistent quality.

Material and Cost Savings: By adjusting the blow-up ratio and haul-off ratio, it is possible to produce thinner films with highly uniform thickness, thereby reducing raw material consumption and improving economic efficiency.

Routine maintenance is essential for extending the service life of a monolayer blown film machine. However, it is important to be aware of certain precautions before performing maintenance. The most critical point to note is as follows:

  1. Never expose the die head or barrel to cold water while they are at high temperatures; doing so can cause the metal to crack or deform due to rapid, uneven cooling.
  2. When there is a risk of hard metal objects falling into the hopper, a magnetic separator must be installed to capture such foreign matter and prevent damage to the screw.
  3. It is strictly prohibited to remove safety guards or bypass emergency stop switches. During maintenance, a strict “lockout/tagout” (LOTO) procedure must be followed.

Summary

Are you looking for a high-quality single-layer blown film machine for your project? Ruian Xinye Packaging Machinery Co., Ltd. is an excellent choice. We provide the following:

  • Upon completion of production, we will test and commission the production line, capturing photos and videos to share with the client via email or instant messaging.
  • Once commissioning is complete, we will pack the equipment according to export standards, ready for shipment.
  • At the client’s request, we can dispatch engineers to the client’s facility to provide installation guidance and staff training.
  • Our after-sales service team—comprising engineers, sales managers, and after-sales service managers—will provide comprehensive, end-to-end support for your project through a combination of online and on-site assistance.
Share the Post:
Brand comes from quality, and reputation comes from sincerity.

Xinye Machine with a long history is located in Ruian economically developed city on the seashore of the East China sea of Zhejiang.We are an experienced manufacturer in polyethylene film,bubble film extrusion machines, and related bag making machines field since 1995

Get A Quote